www.segra.org

If you are tired of electric bills and you are interested in finding out about getting lower electricity cost then you must read the following – it may surprise you. I’ll begin with the news that you yourself can make more than enough electrical power to run every appliance in your home, with very little investment, and with no help – how can this be? I suggest you read on and you can decide for yourself.

You see, most people get their power supply from the power company; they struggle to pay the high prices and often have to economize elsewhere in order to have such a household staple. On the other hand, there are people who decided that enough is enough, they were fed up with expensive and unnecessary power bills – they realized they could use green technology to generate infinite free energy that would supply all their power requirements.

As you proceed with your research in the area of getting lower electricity cost take into consideration the fact that anyone can easily get set up with this; with very little time and effort, you can be using your own free, green energy – all it takes is a desire to save money! So you’re probably eager to get in on all the details as to what is involved here; let me explain – it’s just a technique for transforming the energy that is found all around is into free and usable electricity. Do you realize that just about anyone can set up a personal energy generator using sun and wind power in several days right in their own yard?

Although you might only care at the moment about getting lower electricity cost you must realize that it is very feasible to build your own power supply system that can actually decrease your electric bills by as much as 100%! This might sound like a very difficult and very costly process; just recently the whole thing has gotten much more accessible – it seems that there is one renewable energy expert and a pioneer in this field who discovered a way to make this accessible to anyone.

Companies whose product objectives include reducing costs or waste, more reliable equipment management; improved physical asset control or greater situational awareness should investigate the variety of capabilities wireless sensor systems can provide. In addition to the potential savings in energy, there are likely many additional cash benefits to be found.

With 22% of the globe’s energy consumption, the US is the largest energy consumer and lowest energy producer of any developed economy in the world. The result? It is the most CO2 intensive nation in the world with a daily consumption of 6 gallons of oil per person per day or 19 tons of carbon dioxide per capita annually. This is 80% higher than Europe and 94% higher than Japan.

The greatest sources of US energy expenditure are:

• Industrial Energy 35% (chemicals, steel, processing etc)

• Road transportation is 25%

• Residential energy consumption 21%

• Commercial buildings 16%

Over the next decade, those sectors of the economy driven by consumer demand are the ones which will most rapidly increase greenhouse gases – buildings and houses.

The good news is that there are multiple opportunities to improve upon these areas. For example, the demand for energy could be reduced by 25 to 30% through a series of low cost, high return steps:

• Monitor & control of energy consumption specifically heating and cooling in homes and buildings – Smart Grid

• Replacement of incandescent bulbs with compact florescent lighting

• Equipment replacement, choosing high-efficiency water heaters and Energy StarTM appliances when it’s time for new These seemingly small steps save energy and reward investment with a rapid payback of less than 2 years, although many are immediate and some actually pay for themselves instantaneously.

In fact, according to the McKinsey Report “Reducing U.S. Greenhouse Gas Emissions: How Much What Cost” 40% of the total options for reducing greenhouse gases do not cost, rather releases money into the economy.

As the recognition not only of the costs of global warming, but also the savings to be realized with replacement and upgrading, become apparent, opportunities abound! There are numerous initiatives and programs supporting environmentally friendly products and solutions which continue to unfold at a breakneck pace. These initiatives are for products designed to be manufactured using greener processes and handled responsibly at the end of their life cycle as well as those specifically designed to aid industries and individuals in reducing their carbon footprint. Products such as Western Digital’s GreenPower hard drives and Seimens hybrid drive system for buses reduce energy consumption and CO2 emissions up to 40 percent. Both were developed under green initiatives and are taking their industries by storm.

Green Engineering, what is it?

Clean Energy Act, RoHS & WEEE

WEEE As of August 13, 2005, producers have been required to finance the collection, treatment, recycling and recovery of all Waste Electrical & Electronic Equipment

RoHS As of July 1 2006 Electrical & Electronic Equipment may no longer be sold in the European Union if it contains any of six banned substance Restriction of Hazardous Substances On March 1 2007 the first phase of Administration on the Control of Pollution Caused by Electronic Information Products came into effect.

The Climate Control Bill introduced by Representatives Edward Markey (D-Mass.) & Henry Waxman (D-Calif.) in May of 2009 introduced the most recent version of the American Clean Energy & Security Act and aims to reduce greenhouse gas emissions by 17% below 2005 levels by the year 2020. It would distribute up to 85 percent of pollution permits in a proposed cap-and-trade program.

The Carrot & Stick

Cash & Energy Savings Using Wireless Sensor Networks

Industries everywhere are finding ways to save not only on energy and it’s costs but through the use of wireless networks, in numerous other ways too.

According to Oak Ridge National Laboratories, through the use of wireless sensor networks, savings on energy for motors used in industrial processes could improve efficiency by 20%, resulting in significant cost savings. Wayne Manges said: “With electric motor-driven systems accounting for nearly one-fourth of all electricity consumption in the United States, the potential for savings is huge.”

The Department of Energy’s Industrial Technologies Program works with US industry to improve environmental performance and energy efficiency. The ITP is distributing 15 million to support R&D specifically to improve energy efficiency in industrial processes. Already a number of new wireless sensor products are being developed together with the Department of Energy.

Cost savings with wireless systems are recognized in multiple areas including materials and labor where the cost of running wire in plants ranges between $155 and $3,700 per foot. The typical payback for wired systems is 24 months and less than a quarter of that for a wireless equivalent, only six months. Add in the on-going energy savings and the return on investment decision is very clear.

In a large number of industries, companies are recasting their product lines to implement wireless technologies. “We can’t think of any segment of the industry that isn’t going to be impacted by this,” states Honeywell’s CTO Dan Shiflin.

Wireless sensor networks of all varieties are exploding into our world. There is a massive amount of research & development, from academia to start-ups, pushing to create proverbial “better-faster-cheaper” products. A growing number of products are based on an emerging specification “ZigBee”. A majority of utility companies that have settled on a standard have identified ZigBee as their preference due in main to its inherent security capabilities. Real-time data from wireless sensors networks will enable companies to achieve greater productivity and efficiency by continually improving their processes.

Named BP International’s first Director of Technology & Sensory Networks, for the oil company’s Technology Office, Ken Douglas said “You don’t ask people ‘How would you use ZigBee?’ Because they don’t know, but if you ask them: ‘How would you use information that you can now access for the first time?’ They have to think about it for a bit, but then the ideas just starting pouring out.”

In addition to the benefits of ZigBee’s security layers, the mesh network is highly reliable, flexible and can connect a variety of sensors simultaneously including protocols such as OPC, Modbus and HART.

The technologies for green engineering are not only cost effective, if done right, they are cash positive. When it comes to the design and development of products that are energy efficient and eco-friendly, as well as cost effective, wireless sensor networks make “better faster cheaper” energy saving products. Electronic designs using Zigbee products are making home sensors and energy saving devices a reality.It is less expensive when you get smarter, simpler products with better resource utilization while conserving precious resources.

Engineering…great profession…

“Engineering … it is a great profession. There is the fascination of watching a figment of the imagination emerge through the aid of science to a plan on paper. Then it moves to realization in stone or metal or energy. Then it brings jobs and homes to men. Then it elevates the standards of living and adds to the comforts of life. That is the engineer’s high privilege.”

Herbert Hoover, Civil Engineer, 1929. 31st President

Although wind energy is not yet being utilized to its full potential, the growth of this industry has led to a marked decrease in energy generation costs over the last couple of decades. While its cost effectiveness is increasing with maturity, it is still important to note that there has already been a substantial eighty to ninety percent reduction in the cost of installed wind power over the last twenty years. Innovation and growth in wind energy generation over the years will ensure continuity in the trend of falling costs. Even though it is still not considered a mainstream source of power, there has been an approximate increase in wind power capacity of more than 30% per capita, in the last five years in the United States alone. It is also important to note that by the end of 2008, the United States overtook Germany as the country with the most wind power capacity installed globally. Moreover, wind power was second only to natural gas in terms of new power capacity, amounting to about 42% of the total new power capacity added in the US in 2008. Nations around the world are now striving to develop and understand the full potential of wind energy, both economically and environmentally. The development of wind energy is not only proving to be a financially viable option, but also one that can be highly beneficial in windy areas as well as to self-reliant small scale farmers, ranch owners and the like. A growth in this industry will also help generate more employment opportunities.

A number of factors need to be taken into consideration, in order to understand what affects, contributes to, or detracts from the cost effectiveness of wind farming.

Financing and Ownership: One of the most important factors in determining the cost efficiency of wind power generation is finance. Since most wind farming projects tend to be owned by individual energy suppliers, financing could run higher than mainstream power sources. This is because utilities and investor owned set-ups obtain provisions for lower cost financing and interest rates. Therefore, when projects are utility owned they tend to be cheaper. Also, since wind energy generation is still not considered part of the norm by many, these stakeholders are not offered as many financial benefits by lenders, unless utility owned. To provide an idea of cost, a wind farm currently costs anywhere from 1.8 to 2.3 million dollars per installed megawatt (MW). While these costs are still higher than constructing a coal or natural gas fired generation facility, there are numerous incentives and long term benefits as explained further below.

Inflation: Wind power is one of the few energy sources that does not depend on oil or fuel for production. Therefore, the ups and downs that affect fuel prices do not affect this industry. Once the plant is built, and the costs are known and fixed, fuel prices that rise due to inflation do not affect the cost of energy. This makes wind power almost immune to inflation. Additionally, due to the huge savings from the non-dependence on fuel, the amount of capital employed and expenditures on new technology get adjusted over time.

The speed of wind at a given location: The speed of wind varies at different geographical locations. The energy harnessed at any given wind power site is dependent on the cube of the wind’s speed; so when there is an increase in speed, there is an exponential increase in energy generation. Therefore, a wind turbine faced with a faster wind velocity would be more productive with the same infrastructure costs, making the operation considerably more cost effective.

Turbine design: The height of the turbine tower as well as the span of its rotor blades affect the output generated. The taller the tower and wider the area covered by the blades, the higher the productivity. Keeping these factors in mind, developments in blade design, electronic systems as well as other components have helped reduce costs. Also the bigger, newer turbines found today generate a lot more electricity as compared to older models, and at a reduced cost.

The scale of the project: Large scale wind farms are now being offered many incentives (such as grants, subsidies, loan guarantees etc.), which help lower energy costs. Also, transactions and management costs can be covered by the sheer number of kilowatts of power produced per hour as compared to those in a smaller wind farm project. Large scale wind farming puts this sector in the same competitive sphere as other power generation industries.

Policies: Various policies including tax and environmental policies have varied impacts on wind power generation. These policies do affect market access, transmission, incentives and the basic economics of wind farming. Since, it is not possible to give an accurate number of an hourly delivery of electricity due to wind variability; providers are sometimes penalized, irrespective of whether they actually affect the utilities costs of obtaining power. Also they are often faced with the lack of proper standardization or varied demands from utilities. However, a rebuilding of the electricity markets and extended power purchase agreements will continue to contribute to improving the cost efficiencies of wind power projects. The federal tax code also has provisions for a production tax credit for wind power. However, these policies and credit provisions need to be consistent and long-term to have any real positive impact on this industry.

Environmental benefits: Wind power compared to other conventional sources of power is extremely environmentally friendly. It does not depend on fossil fuels nor does it produce any harmful by-products. The economic and environmental costs incurred during the initial set-up period is somewhat nullified over a few months of operation. While producing the same amount of energy in a given period, fuel emits copious amounts of pollutants into the air creating a very dangerous carbon footprint. In turn, wind farming does not adversely affect the quality of life of people or wildlife, thanks to the lack of harmful wastes. Also, as mentioned earlier, since it does not depend on fuel or lack thereof, it will be a lot more cost friendly in the long run both ecologically and financially.

Wind Integration: In order for wind energy to become a major player in energy supply, there needs to be an efficient integration of wind power into the main power grid. Due to the variability of the wind, a small amount of additional energy needs to be generated and fed into the grid. These costs are generally low and can be curtailed with proper planning, interconnection and forecasting. Also, customers may enjoy a lower cost of energy, because there is no consumption of fossil fuels. Efficient market operations and transmission systems will help strengthen this industry and its affordability.

What do you do after you have changed out the light bulbs that will not cost you an arm and a leg?  Actually there are a number of products that I will cover in this article that don’t cost much but can save you a lot of money.

Whether you believe in global warming or not, conserving energy makes sense on many levels.  I have been in the conservation business since 1992 and have always understood that as much as we want to do what is right for the planet, unless I could prove the economic value of a product not many people would buy it.

Here are some options you might not have considered yet (and if you have, why haven’t you implemented them?)  Some ideas have not been traditionally thought of as energy conservation strategies but at closer look they are.  Other ideas have been around for awhile but recent advancements might mean it’s time for an upgrade.

For the purposes of this article I am going to focus on products that reduce hot water consumption.  Studies show that 30% to 40% of water consumed in a residential environment is heated.

I am going to assume that you have already installed low-flow showerheads and aerators, low-flush toilets and replaced your energy wasting light bulbs.  If you haven’t, bookmark this page and go do it.

Idea #1

Check your building pressure:  Higher pressure means that more water is being forced through the low-flow faucets and aerators you installed.  Since they are already restricting flow, reduce the pressure in 5 psi increments until the service level is no longer satisfactory.  It is difficult to say what pressure is the right pressure – it changes from building to building.  If you have a pressure regulator already installed there is no cost to implementing this strategy – experiment with it.

Idea #2

Drip Stop Faucet Washers:  90% of leaks occur in hot water pipes – some are easy to spot, others are hard to find.  If you follow these steps you can pinpoint any problems and then take action to stop the bleeding.  First, check all of your faucets.  If they are leaking – fix them!  The best replacement washers are made by Drip Stop.  Google them, go to their website (turn off the annoying dripping sound) and buy them.  Their patented design uses your faucet’s own internal pressure to create a tight seal which actually makes your faucets easier to turn off as well.

Next turn off all of the fixtures and go look at the meter.  Most utilities are now using meters with a spinner on the face that indicates even the smallest amount passing through the meter.  Again if you have a leak -fix it!

Idea #3

Lower-Flow Showerheads:  That’s right, lower flow.  When they first came out they were just watered down (pardon the pun) versions of the old guzzlers with flow restrictors.  Nobody liked the way they felt but over the years advances were made and there are a number of low-flow showerheads that conserve while providing a quality showering experience.

But they have evolved and now there are an even better ones available and here are 4 reasons why:

1.)  One is rated at 1.59 gpm versus the old 2.5 gpm wasters.  This can save an average family of 3 about $155 per year – at around $40 your payback is under 4 months!

2.)  When we are pre-warming the water before we get in the shower most of us on the faucet and let it run while we do other things.  1 or 2 minutes later we return to a shower filled with steam, adjust the temperature and step in. 

One manufacturer has patented a technology that actually turns off the water once it reaches 95°F.  You can go about your business until you are ready, pull on a chain and take your shower.   This increases the savings by another $75 per year, for a total of $230 saved per year.  That’s a 2 month payback at $40 per shower head!!

3.)  The demise of most showerheads is clogging from lime (or other minerals) deposits.  Many new models have anti-clog spray nozzles that are cleaned by dragging you finger across the nozzle tips while the water is running.

4.)  Pressure can drastically change the amount of water flowing through your fixtures (see Idea #1 above).  Some new models use pressure compensating technology that helps maintain a consistent flow rate across the spectrum of building pressure from high to low. And they feel great, even with lower pressure.

The best of the new fixtures that I have found are called the Evolve Showerhead and are available at The Energy Conservation Store online.  And one of their polished chrome or brushed nickel showerhead (hand held also available) would look great with any decor.

There are other options but I have run out of time.  If you have any questions please send me an email at the link below.

It is safe to say that wind energy is essentially free energy. It comes from the heating effect of the earth’s surface by the sun. This heating effect is irregular because of the uneven surface of the earth. It therefore gives rise to airstreams that move between the cooler zones and the hotter zones. This is the wind that blows and that makes the blades on the wind turbines move and thus generate electricity.

Wind energy business model: financing of wind energy

In the nineteen eighties the wind energy generators that were installed typically showed a cost of 30 cents per kilowatt-hour period. This in itself was not a very attractive price compared to the conventional power generators that existed already. However over the last twenty years fossil fuel prices have gone up, and wind generation prices have come down. Today we see a reduction of almost 80 percent in the cost per kilowatt-hour thanks to these factors and the latest high technology wind turbine generators. 5 cents per kilowatt-hour is a common phenomenon now. This is clearly an extremely advantageous rate at which to pay for one’s electricity.

Further advantages favor wind energy compared to fossil fuels. Wind energy is easily harvested on farms and ranches, which have an abundant supply of this free energy source. Wind energy is available to anyone who lives in an area where the wind blows. There are no imports necessary or even possible from foreign countries. This is a great difference compared to fossil fuels where importing large quantities of such fuels is a normal if unfortunate occurrence. Fossil fuels of course also are highly polluting and not a renewable source of energy.

To make sure that the wind energy generation can be done in a profitable and effective manner, it is necessary to select a site with certain minimum criteria. Wind speed, for example, which is directly correlated to the amounts of electricity that can be generated, must be at least 5m per second in this case.

Improving the financials for wind energy even further

A wind energy developer applying utility financing to wind energy power plants can already generate wind power for as low as 5 cents per kilowatt-hour from a standard 50 MW wind power plant. However this price for kilowatt-hour can drop to as little as 3,5 cents, which is a 30 percent reduction. Wind power generation in this sense is even more attractive compared to say gas power plants and it is clear that wind power generation costs will continue to decrease in the coming years.

Save money and save the environment at the same time!

The environmental question of course is a very important one concerning wind energy and any other renewable energy source. Wind energy is clean. This is in comparison to say coal emissions from coal fired energy plants, which release very small dust particles into the atmosphere. These dust particles can have a serious sometimes fatal effect on human beings because of the cardiovascular and respiratory diseases that can be provoked. They may also result in a higher infant mortality rates for the same reason. Coal plants of course are also responsible for the production of greenhouse gases and the phenomenon such as acid rain. Use of coal power plants can be clearly linked to both a worsening visibility in the earth’s atmosphere and global warming.

Wind power now needs to be set-up with the long-term power generation contracts to solidify and consolidates market acceptance of this new and renewable energy source. The advantages that should allow this to happen include the minimum cost of life cycle for wind energy plants, because they have minimum operating expenses and no fuel purchase is necessary. Wind energy can be used and reused, but will never contribute to any of the pollution that is generated by the conventional fossil fuel power plants.

If you’ve been shocked by energy prices and you are interested about no more electricity cost increases then do yourself a favor and read the following review – you are going to find it super important. The general public relies on the electric company for their energy; but there is a little-known system that can supply all your needs direct from mother nature without going to a lot of trouble or expense.

You may raise an eyebrow at this claim, but the fact of the matter is that anybody can make their own electricity supply with an easy-to-use new green technology, and do away with those expensive monthly power bills once and for all! All this is possible – no initial deposit required, and no monthly invoices, simply free and environmentally-friendly power which will keep your home running efficiently.

If you’re ready to do a google search for information on no more electricity cost increases; it is very important that you hear the exciting news that you can take advantage of a new technology already used by thousands of satisfied users across the country and all over the world that gets you set up with quickly and easily so you can start saving a lot of money. So we’ve piqued your curiosity and you’re wondering what sort of method is involved; you just need to use what mother nature has provided – adapting the energy that is found naturally into something useful, on your own property in almost no time and with no outside help required. The most amazing part about this is that anybody can set this up, even if you lack technical know how and even if you know nothing about electricity.

As you continue to research the topic of no more electricity cost increases, here’s some very welcome news for you – by taking advantage of this solution, you are not only using guilt-free green technology for your energy, it is possible to get paid by your power company for making your own electricity! Just picture the ‘luxury’ of air conditioning, electric heat, washers, dryers, etc., free from worry about payments, and even getting paid for the extra energy you produce. Are you still skeptical? Don’t risk missing out on a good thing – take a look at this system; I think that it will make you want to start generating your own energy immediately.

If your monthly payments keep growing each month and you’ve come across our site while checking into the topic of how to cut electricity cost be sure to read this article – you are sure to find it of interest. I’ll begin with the news that you yourself can make plenty of clean, green energy for everyone in your entire household, without outside assistance, and without spending a fortune – sounds impossible? Hear what i have to offer on the subject and get the great news.

It’s like this – most people expect the electric company to supply their electricity; they struggle to pay the high prices and at the same time watch their bank account decreasing for something like electricity. But then there are those who found another way of doing things, since they didn’t want to be saddled with all those bills – what they wanted is absolutely free and unlimited power supply for the rest of their lives.

So, before you try to find out more about how to cut electricity cost be aware of the fact that these resources are available to anyone, including you; actually you can enjoy this $0 cost power supply in just few days from now – does free, clean energy sound appealing to you? I guess that by now you are already full of curiosity as to how this can be achieved; let me explain – it’s just a technique for creating electricity out of ‘thin air’ or ‘out of the blue’ through the power of the wind and the sun. No matter who it is, would you believe that they can make their very own solar and/or wind energy system very quickly and easily without even leaving their property?

Even if you’re probably just curious about how to cut electricity cost understand that it is both easy and inexpensive to construct your own source of energy that can drastically reduce your power bills or even eliminate them entirely. You might be saying to yourself that this is too big an undertaking; i’m pleased to report that this is no longer the case – fortunately for all of us, a well-respected expert in the highly specialized field of renewable energy has streamlined the process to let everyone reap the rewards.

If you are tired of electric bills and you are interested in finding out about the cheapest home electricity cost then you should keep on reading – it may surprise you. What if i told you that you can produce plenty of clean, green energy for everyone in your entire household, without outside assistance, and without spending a fortune – how can this be? Keep reading the following report and you’ll realize what is possible.

You see, most people get their power supply from the power company; they pay their bills month-by-month and say good-bye to the hard-earned money they spend on something like electricity. On the other hand, there are people who decided that enough is enough, they were tired of spending their income on a natural resource – they wanted to take advantage of an abundant and no-cost power source that would last for a lifetime.

Therefore, if you are intrigues about the cheapest home electricity cost it is important that you’ll know that you can join these people, with very little time and effort, you can be using your own free, green energy – does free, clean energy sound appealing to you? If you’re like most people, you are probably now full of questions as to what is involved here; it’s really a very easy process of creating electricity out of ‘thin air’ or ‘out of the blue’ through the power of the wind and the sun. Do you realize that just about anyone can set up a solar and wind energy generating system of their own in several days right in their own yard?

Even if you’re probably just curious about the cheapest home electricity cost i hope you see how simple it is to build your own power supply system that can actually decrease your electric bills by as much as 100%! This might sound like a very difficult and very costly process; however, green technology has gotten both easier and less expensive – happily for us, a respected professional who is on the cutting edge of the green technology movement has found a way for the average person to get in on it.

If you’re looking for ways to economize and you want to find out about $0 electricity cost then by all means listen to what we have to say – you are in for a real eye opener. Wealthy utility companies provide the majority of us with our electricity; but there is a little-known system that can provide you with all the electricity you need with a simple and low-cost method.

Most people would probably find it unbelievable, but in truth, the public has the capability to produce their own household’s power supply quite easily, and without being ‘married’ to any local or national power company. All this is possible – no more worrying about how you’re going to pay the monthly bill, just a vast supply of naturally-produced energy to use as you wish.

Before you try to learn more about $0 electricity cost; it is critical that you’ll be aware of the fact that there is a simple method that is already being utilized by thousands of people across america and in other parts of the globe that gets you set up with quickly and easily so you can start saving a lot of money. So this sounds great, and now you want to know how this new system works; all that’s involved is using renewable energy sources – taking natural energy sources and transforming them into electricity, right in your own yard, with little time and effort, and you can do it alone! And here is what makes it really ideal – anyone can do it, even if you have minimal technical skills and although you probably haven’t studied the field of electricity.

But as you go on learning about $0 electricity cost, listen to some more great information – with this special way, you are helping the planet by using renewable energy and in addition, with tax credits and by selling extra power to your electric company, you can save money, and even make money! Imagine having a cool house in the summer and a warm one in the winter, without counting each cent, and even getting paid while nature does its job. Too good to be true? Go ahead and give in to your curiosity – let us give you a tour; I’ll willing to bet it’ll shock you as much as it shocked me.

If it happens to be that you’re wondering about how to calculate your electricity costs then listen to what we have to share on the subject – you are in for a real eye opener. Electric companies charge most of us high prices for heat and lights; but now it’s possible to get a system that can give you unrestricted energy for all your family’s needs without spending a lot of time and money.

You may find it very hard to believe, but in truth, the public has the capability to easily generate plenty of power for their personal needs and those of their family, and no longer have to depend on expensive electric companies. This future can be yours – freedom from expensive bills for a staple such as electricity, just a vast supply of naturally-produced energy for your entire household.

Just before you continue your research on how to calculate your electricity costs; it is critical that you’ll be aware of the fact that there is a simple method that is already being utilized by thousands of people across america and in other parts of the globe that allows you to decrease your power bills by an amazing 80%, often doing away with them entirely. It’s likely that you are now curious as to what sort of method is involved; well, it is based on renewable energy – turning natural sources of energy into electricity that you can use, in your own backyard, and in just a couple of days – all by yourself. The most amazing part about this is that it’s easy to do, even if you lack technical know how and even if the subject of electricity leaves you “in the dark.”

So while you continue educating yourself about how to calculate your electricity costs, get ready to hear another astonishing piece of news – by taking advantage of this solution, you are using clean earth-friendly energy and on top of that, if you generate more power than you need, the power company will buy it from you! Try to envision using your air-conditioning system without counting each cent, and even getting paid while nature does its job. Are you still skeptical? Go ahead and give in to your curiosity – let us give you a tour; I’ll willing to bet you will be eager to get up and running.